Round Test Tube Stand
0.00
Round Test Tube Stand is known by the names of Handy, Little, Space Saver. This circular twelve place Polypropylene Test Tube Stand has four 25 mm diameter holes and eight 19 mm diameter holes in its top plate. The base has matching hemispherical wells and 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.
| Particulars | Pack(Pcs) | Pack (Pcs) |
|---|---|---|
| Test Tube Stand (Round) | 19 mm & 25 mm Ø Tubes | 2 |
| Rack For Micro Centrifuge Tubes | 24 Tubes | 4 |
| Rack For Micro Centrifuge Tubes | 48 Tubes | 4 |
Related products
-
Rotary Pipette Stand
Rotary Pipette Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms that cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring.
Particulars Pack (Pcs) Pipette Stand (Rotary) – For 94 pipettes 1 Pipette Box 4 -
Long Stem Funnel
These Long Stem Funnel have smooth walls, 60″ cone angle and external ribs to prevent air lock. Molded in Polypropylene, these clear funnels can also be steam autoclaved.
Particulars Size Pack (Pcs) Funnel- Long Stem 100 mm 36 Funnel- Long Stem 150 mm 12 Industrial Funnel 200 mm 12 Industrial Funnel 250 mm 6 -
Horizontal Pipette Stand
Our Detachable Horizontal Pipette Stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, the Autoclavable Horizontal Pipette Stand has two sides that are attached with each other with three metallic rods coated with Polypropylene. Our Horizontal Pipette Stand can be easily disassembled for space saving storage.
Particulars Pack (Pcs) Pipette Stand (Horizontal) – For 12 Pipettes 6 -
Wire Pattern Test Tube Stand
Wire Pattern Test Tube Stand is an economical substitute for wire racks, as it is submersible and autoclavable and it becomes stackable when it is empty. The Wire Pattern Test Tube Stand is available in different colors and is made of a special blend of Polypropylene, which makes it sink in a water bath and maintain their stability even in agitated water. Our Wire Pattern Test Tube Stand can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and bars that lock into rack tops.
Particulars Pack(Pcs) Pack (Pcs) Test Tube Stand (Wire Pattern) 13 mm x 90 Tubes 6 Test Tube Stand (Wire Pattern) 16 mm x 60 Tubes 6 Test Tube Stand (Wire Pattern) 20 mm x 40 Tubes 6 Test Tube Stand (Wire Pattern) 25 mm x 24 Tubes 6 Test Tube Stand (Wire Pattern) 30 mm x 21 Tubes 6 Test Tube Stand (Wire Pattern – Fix) 13 mm x 36 Tubes 4 Test Tube Stand (Wire Pattern – Fix) 16 mm x 36 Tubes 4
Request Call Back
Reviews
There are no reviews yet.