Showing 1–9 of 11 results
-
Cathode-Ray Tube Deflection Effect for Physics Lab
Details for Cathode-Ray Tube Deflection Effect for Physics Lab
Deflection Effect : to demonstrate the deviation of cathode ray by means of a magnet.
.
Cathode Ray is deflected under influence of magnet , when a magnet or a discharged rod is brought near the tube. On a bakelite baseWe are leading manufacturers, suppliers & exporters of Cathode-Ray Tube Deflection Effect for Physics Lab. Contact us to get high quality designed Cathode-Ray Tube Deflection Effect for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
-
Helmholtz Coils for Physics Lab
Details for Helmholtz Coils for Physics Lab
Provide a substantially uniform field at the centre space. Each coil has a moulded plastic former 152 mm in diameter with 320 turns of 22 SWG, enamelled wire giving a mean diameter of 136 mm..
The rod has a sliding boss which locks into the tapered hole in the universal stand. Dimensions of Coil & support rod 305 x 152 x 25 mm. Supplied with instructions.We are leading manufacturers, suppliers & exporters of Helmholtz Coils for Physics Lab. Contact us to get high quality designed Helmholtz Coils for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
-
Ohms Law Apparatus for Physics Lab
Details for Ohms Law Apparatus for Physics Lab
This apparatus is designed to demonstrate Ohms Law. Consisting of a sheet metal enclosure with milliammeter, voltmeter, rheostat, push key and terminal posts..
Simply connect an external battery and a suitable resistance to the terminal posts, then press the push key. Readings are taken from the milliammeter and voltmeter and the resistance is calculated using Ohms Law.* Current flow controlled through circuit by rheostat
* Colour coded connection terminals
* Scratch resistant enclosure
* Circuit diagram printed on enclosure to aid understandingWe are leading manufacturers, suppliers & exporters of Ohms Law Apparatus for Physics Lab. Contact us to get high quality designed Ohms Law Apparatus for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
-
Oscilloscope Dual Trace 20 MHz for Physics Lab
Details for Oscilloscope Dual Trace 20 MHz for Physics Lab
Elegant, DC to 20MHz Bandwidth 1mV/div Sensitivity on Both Channels CH1 & CH2 Independent Channels CH1 or CH2 Trigger Signal Output Algebraic Addition and Subtraction X-Y Operation 10ns/div to 0.2s/div Time Base Z Modulation TTL Level 8 x 10 cm Display Internal Graticule TV Triggering Frame (V) & Line (H) Line Trigger, ALT Triggering, Trigger Lock Facility, Single Sweep, Variable Hold Off, Component Tester.
TRIGGER SIGNAL OUTPUTOutput Voltage:Minimum 100mV for 1 div ofCH1 / CH2 trigger signal.
TIME BASE
Sweep Speed:20 Calibrated steps. 0.1μs/divto 0.2s/div in 1, 2 & 5sequence.
Accuracy:3%.
Sweep Magnifier:x10 Magnification increasesthe fastest sweep upto 10ns/div.
Accuracy:±8%.
Variable:Uncalibrated continuously variable control between steps,extends slowest sweep speedto 0.5s/div (approx.).
Hold Off Time:4:1 continuously variable.
TRIGGER SYSTEM
Sweep Mode:AUTO, NORM, SINGLE.
Source:CH1, CH2, ALT, LINE, EXT.
Slope:Positive or Negative.
Coupling:AC/DC coupling.
Trigger Sensitivity
Internal:Auto:1.0 div – 20Hz to 20MHz.
Normal:1.0 div – 10Hz to 20MHz.
Lock:2.0 div – 50Hz to 10MHz.
Alt:>3div – 50Hz to 20MHz.
External:Auto:0.3V p-p – 20Hz to 20MHz.
Normal:0.3V p-p – 10Hz to 20MHz.
Lock:0.3V – 50Hz to 10MHz.HORIZONTAL DEFLECTION
Deflection Coefficient:Same as CH1.
Bandwidth:DC – 1MHz (-3dB).
Input Impedance:1M ohms // 25pF approx.
Phase Difference:<3O (DC – 50KHz).
COMPONENT TESTER
Component Tester allows V-I characteristics of a DeviceUnder Test (D.U.T.).
Test Voltage:7.5V r.m.s. (approx.).
Test Current:20mA max. (approx.).
Test Frequency:50Hz or 60Hz (MAINS).
GENERAL INFORMATION
Cathode Ray Tube:140mm Rectangular screen,Internal Graticule, 8 x 10 cm,P31 phosphor.Accelerating potential : 2kV.
Z-Modulation:±5V p-p signal upto 2MHz modulates at normal intensity.
Calibrator:Provides 0.5V ±2%, 1KHz ±2%square-wave output for probe compensation.
Power Requirement:220V AC ±10%, 50Hz ±5%,35VA (max.).
Dimensions:130 (H) x 320 (W) x 400 (D)mm approx.Weight:7.2 Kgs. approx.
Standard Accessories:Instruction Manual, Mains cord,BNC to Crocodile Input Leads- 2 Nos.
Optional Accessories :High impedance switch probe with x1 or x10 attenua-tion.
Environmental Specifications :Operating conditions Normal : 10OC to 35OC, RH45% to 85%.Operational : 0OC to 40OC,RH 35% to 90%.
We are leading manufacturers, suppliers & exporters of Oscilloscope Dual Trace 20 MHz for Physics Lab. Contact us to get high quality designed Oscilloscope Dual Trace 20 MHz for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
-
Oscilloscope Single Trace 10 MHz for Physics Lab
Details for Oscilloscope Single Trace 10 MHz for Physics Lab
DC to 10MHz Bandwidth, 5mV/div Sensitivity, 100ms/div to 100ns/div Time Base, X-Y Operation, Auto or Normal Trigger Selection, Triggering upto 15MHz, 8 x 10 cm Display, Trace Rotation, 140mm Rectangular CRT, Internal Graticule
Space Saver.
VERTICAL DEFLECTION (Y)Deflection Coefficient: 5mV/div to 20V/div in 12 calibrated attenuator positions with5mV/div, 10mV/div & 20mV/div as basic ranges & 4multipliers x1, x10, x100 &x1000.
Accuracy:+5%.
Bandwidth: DC – 10MHz (-3dB), dc coupled.10Hz – 10MHz (-3dB), accoupled.
Rise Time: 35ns or less.
Input Impedance: 1MΩ & 40pF approx.
Maximum Input Voltage: 400 Volts (dc + peak ac).TIME BASE
Sweep Speed: 6 Calibrated Steps 100ms/divto 1μs/div.
Accuracy: +5%.
Variable : ( 10: 1 approx)Uncalibrated continuously variable control between steps, extends fastest sweep speed to100ns/div.TRIGGER SYSTEM
Trigger Mode: Automatic or Normal with Level Control.
Source: Internal or External.Trigger Sensitivity:
Internal: Auto 1 DIV – 50Hz to 15MHz
Normal 1 div – 10Hz to 15MHz.
External: Auto 1V p-p – 50Hz to 15MHz
Normal 1V p-p – 10Hz to 15MHzX-Y MODE
Deflection Coefficient: 1V/div.
Accuracy: +5%.We are leading manufacturers, suppliers & exporters of Oscilloscope Single Trace 10 MHz for Physics Lab. Contact us to get high quality designed Oscilloscope Single Trace 10 MHz for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
-
Power Supply (D.C) Regulated (Digital) 0-30V: Capacity: 2A for Physics Lab
Details for Power Supply (D.C) Regulated (Digital) 0-30V: Capacity: 2A for Physics Lab
The DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument. Its unique feature is overload protection which makes it a safe power source for testing of electronic equipment..
Indication of: 3 1/2 digital panel meter voltage/ currentor analog panel meter
Accuracy of DPM: 0.5% + 1 digit
Line Regulation: 0.05% plus 2 mv(for + 10% change in mains voltage)
Protection: Automatic cross-over type of output characteristic from C.V. to C.C.
Power Source: 220 V AC + 10% / 50Hz.We are leading manufacturers, suppliers & exporters of Power Supply (D.C) Regulated (Digital) 0-30V: Capacity: 2A for Physics Lab. Contact us to get high quality designed Power Supply (D.C) Regulated (Digital) 0-30V: Capacity: 2A for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
-
Power Supply 5 KV E.T.H. for Physics Lab
Details for Power Supply 5 KV E.T.H. for Physics Lab
Output 100 to 5 KV at 3 mA continuous. Fully floating EHT circuits suitable for operation of spart, counters, discharge tubes etc. Provided variable output upto 5 KV. The EHT circuit are fully floating so that certain experiments the positive or negative terminals may be safely connected to earth. .
The EHT output are taken from 4mm sockets and displayed on a 0 to 5 KV meter. Also on the front panel are a mains switch and indicator lamp. The main fuse is mounted on the back panel. In a robust metal case with feet, mains cable fitted by moulded connector. Cable and connector removable for storage. Workable on 220V 50 Hz.
We are leading manufacturers, suppliers & exporters of Power Supply 5 KV E.T.H. for Physics Lab. Contact us to get high quality designed Power Supply 5 KV E.T.H. for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
-
Power Supply A.C/D.C Low Tention for Physics Lab
Details for Power Supply A.C/D.C Low Tention for Physics Lab
0-20 volts D.C. And 0-25 volts A.C. continuously variable at 10/5/2 Amps. With dual meter to read volts AC/DC.
.
Output is provided at 4 mm socket terminals separate for A.C. and D.C. ON/OFF switch, indicator and two output safety fuse.We are leading manufacturers, suppliers & exporters of Power Supply A.C/D.C Low Tention for Physics Lab. Contact us to get high quality designed Power Supply A.C/D.C Low Tention for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
-
Semiconductor – Diode Unit for Physics Lab
Details for Semiconductor – Diode Unit for Physics Lab
Mounted on transparent base, with 4mm color coded sockets, with circuit diagram printed for demonstration..
We are leading manufacturers, suppliers & exporters of Semiconductor – Diode Unit for Physics Lab. Contact us to get high quality designed Semiconductor – Diode Unit for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.For similar products visit at main page of Electronics Lab Experiments..