Oscilloscope Dual Trace 20 MHz for Physics Lab
Details for Oscilloscope Dual Trace 20 MHz for Physics Lab
Elegant, DC to 20MHz Bandwidth 1mV/div Sensitivity on Both Channels CH1 & CH2 Independent Channels CH1 or CH2 Trigger Signal Output Algebraic Addition and Subtraction X-Y Operation 10ns/div to 0.2s/div Time Base Z Modulation TTL Level 8 x 10 cm Display Internal Graticule TV Triggering Frame (V) & Line (H) Line Trigger, ALT Triggering, Trigger Lock Facility, Single Sweep, Variable Hold Off, Component Tester.
TRIGGER SIGNAL OUTPUT
Output Voltage:Minimum 100mV for 1 div ofCH1 / CH2 trigger signal.
TIME BASE
Sweep Speed:20 Calibrated steps. 0.1μs/divto 0.2s/div in 1, 2 & 5sequence.
Accuracy:3%.
Sweep Magnifier:x10 Magnification increasesthe fastest sweep upto 10ns/div.
Accuracy:±8%.
Variable:Uncalibrated continuously variable control between steps,extends slowest sweep speedto 0.5s/div (approx.).
Hold Off Time:4:1 continuously variable.
TRIGGER SYSTEM
Sweep Mode:AUTO, NORM, SINGLE.
Source:CH1, CH2, ALT, LINE, EXT.
Slope:Positive or Negative.
Coupling:AC/DC coupling.
Trigger Sensitivity
Internal:Auto:1.0 div – 20Hz to 20MHz.
Normal:1.0 div – 10Hz to 20MHz.
Lock:2.0 div – 50Hz to 10MHz.
Alt:>3div – 50Hz to 20MHz.
External:Auto:0.3V p-p – 20Hz to 20MHz.
Normal:0.3V p-p – 10Hz to 20MHz.
Lock:0.3V – 50Hz to 10MHz.
HORIZONTAL DEFLECTION
Deflection Coefficient:Same as CH1.
Bandwidth:DC – 1MHz (-3dB).
Input Impedance:1M ohms // 25pF approx.
Phase Difference:<3O (DC – 50KHz).
COMPONENT TESTER
Component Tester allows V-I characteristics of a DeviceUnder Test (D.U.T.).
Test Voltage:7.5V r.m.s. (approx.).
Test Current:20mA max. (approx.).
Test Frequency:50Hz or 60Hz (MAINS).
GENERAL INFORMATION
Cathode Ray Tube:140mm Rectangular screen,Internal Graticule, 8 x 10 cm,P31 phosphor.Accelerating potential : 2kV.
Z-Modulation:±5V p-p signal upto 2MHz modulates at normal intensity.
Calibrator:Provides 0.5V ±2%, 1KHz ±2%square-wave output for probe compensation.
Power Requirement:220V AC ±10%, 50Hz ±5%,35VA (max.).
Dimensions:130 (H) x 320 (W) x 400 (D)mm approx.Weight:7.2 Kgs. approx.
Standard Accessories:Instruction Manual, Mains cord,BNC to Crocodile Input Leads- 2 Nos.
Optional Accessories :High impedance switch probe with x1 or x10 attenua-tion.
Environmental Specifications :Operating conditions Normal : 10OC to 35OC, RH45% to 85%.Operational : 0OC to 40OC,RH 35% to 90%.
We are leading manufacturers, suppliers & exporters of Oscilloscope Dual Trace 20 MHz for Physics Lab. Contact us to get high quality designed Oscilloscope Dual Trace 20 MHz for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Electronics Lab Experiments..
Related products
-
Masses Slotted Spare Brass
Masses Slotted Spare – Brass
Accurate machined Brass Masses.
Capacity
• 2 g
• 5 g
• 10 g
• 20 g
• 50 g
• 100 g
• 200 g
• 500 gFor similar products visit at main page of Mechanics Physics Labware.
-
Drilled Ball Set
Drilled Ball Set in Plastic Case
Specifications :
1. Aluminum, brass, cork, lead, steel, and wood drilled balls
2. Plastic case with foam insert
Includes :
(12) Drilled balls
(1) Plastic case with foam insert
This set contains two drilled balls each of the following materials: aluminum, brass, cork, lead, steel, and wood. These are perfect for pendulum experiments but can be used for a variety of lab needs.For similar products visit at main page of Mechanics Physics Labware.
-
Steel Marbles
3/4″ Steel Marbles Pack of 5
Specifications :
Includes:(1) Pack of steel marbles
3/4″ Steel Marbles Pack of 5For similar products visit at main page of Mechanics Physics Labware.
-
Plastic Pulley Low Friction
Plastic Pulley Low Friction
Specifications :
One (1) high quality, single wheeled plastic pulley, on an open sided steel frame, with hooks at each end and one low friction, ball bearing plastic pulley with a diameter of 50 mm. The open sided frame greatly facilitates stringing up as no ‘threading’ is involved.
Inner gap of pulley measures 3 mm, overall length is 9.8 cm. Capable of holding over 30 lbs of weight.For similar products visit at main page of Mechanics Physics Labware.
Request Call Back
Reviews
There are no reviews yet.