Showing 10–12 of 12 results
-
Phototherapy Stand with Trolley (Single Surface)
Technical Specification:
- 4 Special Blue CFL Tubes (20W each)
- 2 Daylight CFL Tubes (20W each)
- Single Head, surface Size, approx. 0.5m x 0.33m
- Head Height Adjustment, approx. 0.95 to 1.5m
- High irradiance at Skin level up to 40uw/cm²/nm (variable with distance)
- Wavelength – 420 to 500nm, with highest intensity at 470 nm
- Dual digital cumulative hour timer for tubes usage and patient exposure
- Antistatic Castors, 2 with brakes
- Power requirement – 230V/50Hz
- Power consumption – 100W
Infant Care Trolley
- Mobile Bassinet Cot for neonates
- Cart on 4 swivel castors (100mm Dia), 2 castors with brake
- Baby Tray with mattress alongwith head up/down facility and X-Ray cassette holder.
- Mattress density approx. 21-25 Kg/m³ and with removable, washable, waterproof cover
- Transparent acrylic, drop down and lockable side panels
- Two shelves below baby bed for under surface phototherapy and storage
-
Resuscitation Unit (STANDARD)
Technical Specification
- Microprocessor controlled unit allow three operational mode, Pre-warm, Manual or Automatic (Servo Controlled temperature System).
- Audio and Visual alarm function for Power failure, temperature deviation, over temperature & Temperature sensor failure.
- APGAR timer to record therapy time
- Convenient X-ray cassette tray under infant mattress.
- Effective carbon steel heater, Specially designed heater head for convenient X-ray test
- Separate display of set & skin temperature
- Inclination of infant bed is adjustable.
- LED Observe light angle is adjustable
- Foldable transparent side panels with two infusion seals.
- Temperature deviation can be amended in front panel directly
- Low pressure suction unit, oxygen supply system and LED phototherapy unit
- Electric height adjusted suit for operation
-
Resuscitation Unit with Fixed Baby Cradle & Drawers with Microprocessor based temperature controller with 4 modes Skin/Air/Manual/Prewarm Mode
Mechanical Specifications :
- Fixed height warmer with attached baby cradle mounted on 4″ wheel
- Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
- Continuous head up/down facility
- X-Ray cassette holder
- Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
- Slots for sensor and ventilator tubing
- Side tray for placement of monitor
- Stainless steel infusion rod with facility to mount Syringe/infusion pump
- Lower shelf below baby tray to facilitate under surface phototherapy. Three drawer for storage.
- Integrated support for 10L Oxygen bottle.
- Oxygen regulator with pressure gauge, flow meter and humidifier bottle along with silicon tubing for delivery of oxygen from humidifier bottle to patient.
- Integrated electrical operated Slow Suction unit with Vacuum Regulator, Vacuum Gauge and autoclavable fluid jar.
- Silicone manual Resuscitator for Infant (250ml) along with face masks size 00 and 01.
- Laryngoscope – Penlight handle with straight blade size 0 and 1.
- Silicone Airways – size 000, 00, and 0
- Height : 74.5″ (1890 mm), Width : 28.0″ (710 mm), Length : 39.0″ (990 mm)
- Bed to Floor Height : 37.5″ (950 mm)
- Distance between baby bed and heater: 33″ (840 mm)
- Mattress size: 30″ (762 mm) x 20″ (508 mm)
- Height of side panel above baby bed: 5.75″ (145 mm)
- Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
- LED Display of Skin Temp., Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
- LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
- Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
- Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
- Keypad lock facility
- Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
- Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
- Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
- Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
- Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
- Operating Voltage: 220-240 VAC, 50Hz
- Power: 800W (Max.)
- Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD
- Power Fail Alarm: Audio with LED indicator
Dimensions :
Performance/Electrical Specifications :