Showing 676–684 of 1291 results
-
Inclined Plane
Details for Inclined Plane for Physics Lab
For investigating sliding friction. Consists of a plane board hinged at the base at one end with a pulley for the force cord at the other end. A moveable block enables the inclination of the plane to be varied. Complete with 100 x 65mm. Reversible friction slider and 70 x 25mm. Metal roller. Board dimensions: 600 x 75mm., Fitted with graduated arc..
We are leading manufacturers, suppliers & exporters of Inclined Plane for Physics Lab. Contact us to get high quality designed Inclined Plane for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Mechanics Physics Labware.
-
Inclined Plane Simple
Details for Inclined Plane Simple for Physics Lab
Simple, hardwood comprising, cut-away base to allow cord to hang freely and hinged plane 60 x 7.5 cm. with aluminium pulley 28 mm. diameter, and stepped lower face to accommodate wood block for setting at angles between 24 and 45 deg. Approximately with cylindrical metal roller and scale pan..
We are leading manufacturers, suppliers & exporters of Inclined Plane Simple for Physics Lab. Contact us to get high quality designed Inclined Plane Simple for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Mechanics Physics Labware.
-
Incubators
Technical Specification:
- Microprocessor based servo controlled temperature system
- Controlled mode: Air .
- Air temperature control range:25°C -38°C (>37°C temperature setting.)
- Set temperature, air temperature, heating power are displayed separately by LED
- Audio and Visual alarm function for Power failure, temperature deviation, over temperature, temperature sensor failure and fan failure.
- Inclination of infant bed is adjustable.
- Humidity is adjustable in two grade only
- Single wall hood 4 operating windows and 2 iris ports.
- A second thermal cut-off function for more safety.
- X-Ray cassette tray
- LED Phototherapy up side unit
- LED Phototherapy down side unit
With optional function:
-
Indirect
Indirect
Specifications :
This equipment is designed for treatment of retinopathy of prematurity and peripheral retinal photocoagulation. Lightweight, ergonomic design, superior performance and durable finish standards are some of the salient features of this ophthalmoscope. It eliminates the need for laser focus adjustments and protects eye against accidental disposition and infectivity. This light weight ophthalmoscope can be adjusted by individuals very easily.Features:
•Designed with the facility to attach the laser system
•Strain free binocular vision
•Pre centered high resolution compact CCD color camera
•High intensity illumination with 80mm diameter spot size
Easy bulb replacement
•Provision to adjust the illumination center manually
•Completely sealed optics for total protection against dirt and dust
•Manual fine focus to get sharp video image -
Induction Coil (Ruhmkorff Coil )
Details for Induction Coil (Ruhmkorff Coil ) for Physics Lab
Induction Coil (Ruhmkorff Coil ) for Physics Lab – The primaries are wound with thicker copper enamelled covered wire on letherite pipe in two layers. The secondary coils are divided into two parts & are given heavy insulation. Each layer is wound in a cover of butter paper & are completing the winding, the entire is dipped into hot wax to seal each layer against moisture effect. The coils are housed in a teakwood base, voltage tested condensers are fitted inside the wooden polished base. Handles to get the spark are fitted on it & make or break points are of silver. One point is adjustable to get any cycle. On/off reversing switch commutator working on 6 to 12 V DC. Size – 10 mm, 25 mm, 50 mm, 75 mm, 100 mm.
We are leading manufacturers, suppliers & exporters of Induction Coil (Ruhmkorff Coil ) for Physics Lab. Contact us to get high quality designed Induction Coil (Ruhmkorff Coil ) for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Magnetism Physics Labware.
-
Induction Coil Demonstration
Details for Induction Coil Demonstration for Physics Lab
Demonstration Induction Coils consists of two coils wound on separate bobbins, one having many turns of fine wire & the other with few turns of heavy wire. It demonstrates that induced potentials are produced either by movement of a permanent or electromagnet or by a change of current in one coil, fitted with insulated 4 mm socket terminals & supplied with a soft iron core, outer coil is 12.5 cm long & is of 5 cm diameter..
We are leading manufacturers, suppliers & exporters of Induction Coil Demonstration for Physics Lab. Contact us to get high quality designed Induction Coil Demonstration for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Magnetism Physics Labware.
-
Inertia Balance
Details for Inertia Balance for Physics Lab
It is a class room demonstration kit for qualitative investigation of nature of mass and making students understand distinction between mass and weight..
Kit comprises two metal trays 130 x 50 mm held 200 mm apart approximately on spring steel strips attached to the sides. One tray has holes to take three equal mass cylinders approximately (L x D) 100 x 25 mm each. The other tray acts as anchor and may be clamped to the bench either horizontally or vertically. Three support pins are supplied to fit radial holes in cylinders. Supplied complete with G clamp for mounting.
We are leading manufacturers, suppliers & exporters of Inertia Balance for Physics Lab. Contact us to get high quality designed Inertia Balance for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Mechanics Physics Labware.
-
Infant Incubator Double Wall Canopy with drawers with Micro Computer based temperature controller with skin / air / manual mode
Technical Specification:
- Acrylic Doubled Wall Canopy with six port holes.
- Front Loading.
- Four Inlets for administration of O2, IV lines or Ventilator tubing.
- Sliding Baby Tray with External jerk free gear based Head Up / Down facility.
- X-Ray cassette sliding facility.
- Stainless Steel rust free Heater, blower sub assembly with changeable micro Air filters.
- Provision of adequate Storage by 3 drawers and an open shelf.
- Humidity heater and Hygrometer.
- Pole for Syringe Pump / Infusion Pump & S.S. IV Stand.