Showing 316–324 of 1291 results
-
Demountable Coils
Coils for Demountable Transformer
Wound on rectangular insulating bobbins, overall height 70 mm These coils are wired to a panel mounting. The earth pin is wired to the front panel and 4 mm socket. All connections are completely surrounded by the panel housing. A separate mains connector with moulded plug is supplied with each coil.
Sizes
1. Coil 50 turns, 4 A, 0.15 W
2. Coil 100 turns, 2 A, 0.55 W
3. Coil 200 turns, 1 A, 2.5 W
4. Coil 500 turns, 0.5 A, 8.95 W
5. Coil 1000 turns, 0.3 A, 39.5 W
6. Coil 2000 turns, 0.05 A, 445 WFor similar products visit at main page of Magnetism Physics Labware.
-
Demountable Transformer
Details for Demountable Transformer for Physics Lab
Demountable Transformer for Physics Lab Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I – core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I – core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories..
We are leading manufacturers, suppliers & exporters of Demountable Transformer for Physics Lab. Contact us to get high quality designed Demountable Transformer for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Magnetism Physics Labware.
-
Dental Air Compressor
- Medical grade air
- Oil free – low noise
- Epoxy coating prevents rusting inside the tank
- Moisture drain facility
- Air filter with an outlet
- Power 750W / 1.0 HP. 152 L/min, 53 dB(A), 6-8 Bar, 30 Ltr.
- Dimension : L410 x w410 x H650mm
Specifications/Details:
-
Dental Chair Programmable (Over Head Delivery Unit)
- Independent up & down movement and backrest movement of the chair.
- Halogen sensor light with double intensity.
- Right arm movable in up down position, for easy seating of the patient. 2 programs in chair… 1 preset working position and other for Zero position.
- Doctor’s stool with adjustable height.
- 1 round switch for the movement of the chair.
- 2 independent switches for the air & water.
- Movable assistant arm
- Feather touch panel for all controls of the chair
- 2 suction point for low and medium suction
- 1-3 way syringe
- 1 – Extra holder
- Pneumatic locking Arm
- Very wide instrument tray
- Feather touch control panel for all controls of chair
- 1 point for 3 way syringe
- 3 points for Air rotor
- 1 LED X-Ray viewer
- A Cotton holder & extra utility tray
- Movable Glass Spittoon
- Cup filler with option for warm & normal water
- Programmable water flow in cup filler.
Specifications/Details:
Unit Consists Followings:
Moveable Foot Control
Assistant Arm
Overhead Delivery Unit
Water Unit
-
Dental Chair Programmable (Traditional Delivery Unit)
- Independent up & down movement and backrest movement of the chair.
- Halogen sensor light with variable intensity.
- Right arm movable for easy seating of the patient. 2 programs in chair… 1 present working position other for Zero position.
- Feather touch control panel present of delivery unit.
- Doctor’s stool with Adjustable height.
- 1 Pedal for chip air (Blow)
- Pedal for Air
- 1 Pedal for air & water
- Round joystick on chair base for chair movements.
- Movable assistant arm
- 2 suction point for low and Medium Suction
- 1-3 way syringe
- Pneumatic locking Arm
- Feather touch control panel for all controls of chair
- 1-3 way syringe
- 3 points for air rotor
- 1 extra holder
- A pressure gauze present for the air rotor
- 1 LED X-Ray viewer
- Fixed water unit with Movable Glass spittoon
- Cup filler with option for warm & normal water
Specifications/Details:
Unit Consists Followings:
Moveable Foot Control
Assistant Arm
Traditional Delivery Unit
Water Unit
-
Desiccator with Porcelain Plate
Desiccator with Porcelain Plate
I.D. (mm) Total Height (mm) Height of Plate (mm) 120 180 110 150 220 135 180 260 160 210 275 180 240 325 210 300 325 235 350 400 255 400 460 300 -
Desiccator with Porcelain Plate, Amber
Desiccator with Porcelain Plate, Amber
I.D. (mm) Total Height (mm) Height of Plate (mm) 120 180 110 150 220 135 180 260 160 210 275 180 240 325 210 300 325 235 350 400 255 400 460 300 -
Desk Type Aneroid Sphygmomanometer
Specifications: Measure scope 0-300mmHg Accuracy +/-3mmHg Sub-division 2mmHg Spring tube 2m Cuff 023 nylon/cotton cuff with D-ring(48*14cm) Bladder PVC/LATEX bladder with two tube(22*12cm) Bulb PVC/LATEX bulb with both valves