Showing 73–81 of 154 results
-
HYDRAULIC C ARM TABLE (C ARM OT TABLE)
- Radio translucent top in four sections for use of C arm image intensifier.
- Compatible for orthopedic attachments.
- Heavy duty smooth gear mechanism to avail all operating positions.
- Durable heavy duty leak proof hydraulic pump with four pillars.
- Eccentric top and hydraulic chamber adjusted at one side of base for maximum use of C ARM image intensifier.
- Changeable oil valve for up & down movement of hydraulic pump.
- Inter changeable head and leg section.
- One radio translucent hand board and one hand rest with S.S. top for transfusion.
- Provided with all standard accessories.
-
HYDRAULIC OT TABLE (MANUAL OPERATION TABLE)
- S.S five sectional top with large cut of perineal drainage tray, built kidney bridge. Both side controls. hydraulic operation tables.
- Heavy duty mild steel base with nylon wheels for easy mobility or stability with single action foot actuated floor locking.
- Smooth gear mechanism to avail all operating positions.
- 50, thick electrically sealed mattress.
- Provided with all spoting accessories.
- Durable heavy duty leak proof hydraulic pump with double cylinder U a concealed in central chamber.
- Provided with all standard accessories.
-
I.V Stand
Stainless steel I.V. stand two/four hooks, mounted on 5cm castors
- Height : Adjustable 136/224 cm.
-
Incubators
Technical Specification:
- Microprocessor based servo controlled temperature system
- Controlled mode: Air .
- Air temperature control range:25°C -38°C (>37°C temperature setting.)
- Set temperature, air temperature, heating power are displayed separately by LED
- Audio and Visual alarm function for Power failure, temperature deviation, over temperature, temperature sensor failure and fan failure.
- Inclination of infant bed is adjustable.
- Humidity is adjustable in two grade only
- Single wall hood 4 operating windows and 2 iris ports.
- A second thermal cut-off function for more safety.
- X-Ray cassette tray
- LED Phototherapy up side unit
- LED Phototherapy down side unit
With optional function:
-
Infant Incubator Double Wall Canopy with drawers with Micro Computer based temperature controller with skin / air / manual mode
Technical Specification:
- Acrylic Doubled Wall Canopy with six port holes.
- Front Loading.
- Four Inlets for administration of O2, IV lines or Ventilator tubing.
- Sliding Baby Tray with External jerk free gear based Head Up / Down facility.
- X-Ray cassette sliding facility.
- Stainless Steel rust free Heater, blower sub assembly with changeable micro Air filters.
- Provision of adequate Storage by 3 drawers and an open shelf.
- Humidity heater and Hygrometer.
- Pole for Syringe Pump / Infusion Pump & S.S. IV Stand.
-
Infant Radiant Warmer (Basic)
Technical Specification
- Microprocessor based servo controlled unit allow two operation mode, automatic and manual mode.
- Display of set temperature and skin temperature.
- Audio and Visual alarm function for various failure .
- Transparent Side panel with two infusion seal.
- Heater consists of anti-explosion micro crystal quartz infrared -radiation tubes, radiation source 800W.
- A second thermal cut-out function for more safety.
- Skin temperature sensor failure function to avoid over temperature.
-
Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode
Standard Specifications
- Fixed height warmer with attached baby cradle and drawers mounted on 4″ (100mm) wheels, 2 with brake.
- Stainless steel baby tray with water proof, zipped cover mattress of density approx.21-25 kg/m³
- Continuous head up/down facility
- X-Ray cassette holder
- Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
- Slots for sensor and ventilator tubing
- Side tray for placement of monitor
- Stainless steel infusion rod with facility to mount Syringe/infusion pump
- Lower shelf below baby tray to facilitate under surface phototherapy, Facility of 3 drawers for storage
- Height : 74.5″ (1890 mm), Width : 28.0″ (710 mm), Length : 39.0″ (990 mm)
- Bed to Floor Height : 37.5″ (950 mm)
- Distance between baby bed and heater: 33″ (840 mm)
- Mattress size: 30″ (762 mm) x 20″ (508 mm)
- Height of side panel above baby bed: 5.75″ (145 mm)
- Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
- LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
- LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
- Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
- Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
- Keypad lock facility
- Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
- Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
- Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
- Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
- Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
- Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
- Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows
Performance/Electrical Specifications
Alarm Condition Alarm Messages on LCD Skin Sensor is unplugged /Faulty Skin Sensor Fail Air Sensor is unplugged /Faulty Air Sensor Fail Measured skin temperature higher than set temperature by 1.0°C Skin Temp. High Measured skin temperature lower than set temperature by 1.0°C Skin Temp. Low Measured skin temperature higher than 38.0°C (With cut-off) Skin Over Range Measured skin temperature lower than 34.0°C Skin Under Range Measured air temperature higher than set temperature by 1.5°C Air Temp. High Measured air temperature lower than set temperature by 3.0°C Air Temp. Low Measured air temperature higher than 39.0°C (With cut-off Air Over Range Heater power is 100% for more than 15mins Chk Sens Position Heater is unplugged or faulty Heater Open Heater Power drive fail/uncontrollable Chk. Pwr. Drive Power Fail Alarm Audio with LED indicator -
Infant Resuscitation Kit (Infant)
An Essential Carrying Kit for providing Effective Resuscitation to an Infant.
(Available in a Carry Bag).Contents of the Kit Infant Resuscitator, Foot Suction, Laryngoscope, Airways.
Infant Resuscitator:
- Rugged; 100% Autoclavable; Reusable.
- 250 ml silicone bellow.
- Non re breathing valve with 40 cm of H2O pressure release.
- Mask sizes : No. 00 & 01.
- 360° swiveling patient connector with standard 15 mm / 22 mm diameter.
- Corrugated PVC oxygen reservoir.
- 1.5 mtr. PVC oxygen tubing.
- Compact, light weight, easy to handle and operate.
- Durable rubber bellow.
- Long lasting stainless spring to provide friction free pumping.
- Completely autoclavable polycarbonate vacuum jar with lid (500 ml capacity).
- Scratch proof powder coated frame.
Foot Suction:
Laryngoscope : Stainless steel straight blades of size 0 & 1 with penlight handle.
Airways : Silicone, autoclavable & reusable in sizes 000, 00 & 0. -
Infusion Pump – Superior
Function
- Tube heating function
- Dual-CPU monitoring function
- Setting the system time
- Body-weight mode conversion
- 3-level occlusion alarm limits setting
- 1500 history records
- Night inner lighting function
- Pressure dynamic display
- Detection of drip sensor
- Wireless communication function
- Smart pulsation compensation function