Showing 118–126 of 154 results
-
Postmortam Table (AUTOPSY TABLE)
Strong stainless steel tubular structure. top is covered with SS sheet with high board. attached with SS sink and water Tap. Two separate shower are prodided for supply of hot and cold water. Complete with four positional SS accessories, instrument tray holder. Epoxy SS finishing. Optional for wheels.
- Size : 2500(L) x 800(W) x 850(H) mm.
-
Resuscitation Unit (STANDARD)
Technical Specification
- Microprocessor controlled unit allow three operational mode, Pre-warm, Manual or Automatic (Servo Controlled temperature System).
- Audio and Visual alarm function for Power failure, temperature deviation, over temperature & Temperature sensor failure.
- APGAR timer to record therapy time
- Convenient X-ray cassette tray under infant mattress.
- Effective carbon steel heater, Specially designed heater head for convenient X-ray test
- Separate display of set & skin temperature
- Inclination of infant bed is adjustable.
- LED Observe light angle is adjustable
- Foldable transparent side panels with two infusion seals.
- Temperature deviation can be amended in front panel directly
- Low pressure suction unit, oxygen supply system and LED phototherapy unit
- Electric height adjusted suit for operation
-
Resuscitation Unit with Fixed Baby Cradle & Drawers with Microprocessor based temperature controller with 4 modes Skin/Air/Manual/Prewarm Mode
Mechanical Specifications :
- Fixed height warmer with attached baby cradle mounted on 4″ wheel
- Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
- Continuous head up/down facility
- X-Ray cassette holder
- Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
- Slots for sensor and ventilator tubing
- Side tray for placement of monitor
- Stainless steel infusion rod with facility to mount Syringe/infusion pump
- Lower shelf below baby tray to facilitate under surface phototherapy. Three drawer for storage.
- Integrated support for 10L Oxygen bottle.
- Oxygen regulator with pressure gauge, flow meter and humidifier bottle along with silicon tubing for delivery of oxygen from humidifier bottle to patient.
- Integrated electrical operated Slow Suction unit with Vacuum Regulator, Vacuum Gauge and autoclavable fluid jar.
- Silicone manual Resuscitator for Infant (250ml) along with face masks size 00 and 01.
- Laryngoscope – Penlight handle with straight blade size 0 and 1.
- Silicone Airways – size 000, 00, and 0
- Height : 74.5″ (1890 mm), Width : 28.0″ (710 mm), Length : 39.0″ (990 mm)
- Bed to Floor Height : 37.5″ (950 mm)
- Distance between baby bed and heater: 33″ (840 mm)
- Mattress size: 30″ (762 mm) x 20″ (508 mm)
- Height of side panel above baby bed: 5.75″ (145 mm)
- Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
- LED Display of Skin Temp., Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
- LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
- Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
- Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
- Keypad lock facility
- Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
- Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
- Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
- Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
- Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
- Operating Voltage: 220-240 VAC, 50Hz
- Power: 800W (Max.)
- Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD
- Power Fail Alarm: Audio with LED indicator
Dimensions :
Performance/Electrical Specifications :
-
Revolving Stool
Four legs, stainless steel top. Wholly stainless steel frame
- Heigh : Adj. 46/68cm.
- Top dia : 35cm.
-
SEMI FOWLER BED
Super deluxe model adjustable Backrest, ABS panels, safely side railing, 125mm swivel castors, telescopic IV stand.
-
SEMI FOWLER BED
Mechainically operated, two sectional, uniformly perforated CRCA sheet top bed. One fix lever handle at foot end to obtain head raise upto 80 deg. Precise rectangular tubular steel frame work. Strong re-informed, “H” shaped legs on
- Overall size : 2O8Lx92Wx60H
-
Single Dome
Name Intensity Halogen Reflection Color Temp. Temp. Increased Dame Area Finish 20″ mobile ot simple 50000±10% Lux 24V-70W Diachronic 4300k 2-4C 20″ Over Backed