Showing 1–9 of 12 results
-
Incubators
Technical Specification:
- Microprocessor based servo controlled temperature system
- Controlled mode: Air .
- Air temperature control range:25°C -38°C (>37°C temperature setting.)
- Set temperature, air temperature, heating power are displayed separately by LED
- Audio and Visual alarm function for Power failure, temperature deviation, over temperature, temperature sensor failure and fan failure.
- Inclination of infant bed is adjustable.
- Humidity is adjustable in two grade only
- Single wall hood 4 operating windows and 2 iris ports.
- A second thermal cut-off function for more safety.
- X-Ray cassette tray
- LED Phototherapy up side unit
- LED Phototherapy down side unit
With optional function:
-
Infant Incubator Double Wall Canopy with drawers with Micro Computer based temperature controller with skin / air / manual mode
Technical Specification:
- Acrylic Doubled Wall Canopy with six port holes.
- Front Loading.
- Four Inlets for administration of O2, IV lines or Ventilator tubing.
- Sliding Baby Tray with External jerk free gear based Head Up / Down facility.
- X-Ray cassette sliding facility.
- Stainless Steel rust free Heater, blower sub assembly with changeable micro Air filters.
- Provision of adequate Storage by 3 drawers and an open shelf.
- Humidity heater and Hygrometer.
- Pole for Syringe Pump / Infusion Pump & S.S. IV Stand.
-
Infant Radiant Warmer (Basic)
Technical Specification
- Microprocessor based servo controlled unit allow two operation mode, automatic and manual mode.
- Display of set temperature and skin temperature.
- Audio and Visual alarm function for various failure .
- Transparent Side panel with two infusion seal.
- Heater consists of anti-explosion micro crystal quartz infrared -radiation tubes, radiation source 800W.
- A second thermal cut-out function for more safety.
- Skin temperature sensor failure function to avoid over temperature.
-
Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode
Standard Specifications
- Fixed height warmer with attached baby cradle and drawers mounted on 4″ (100mm) wheels, 2 with brake.
- Stainless steel baby tray with water proof, zipped cover mattress of density approx.21-25 kg/m³
- Continuous head up/down facility
- X-Ray cassette holder
- Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
- Slots for sensor and ventilator tubing
- Side tray for placement of monitor
- Stainless steel infusion rod with facility to mount Syringe/infusion pump
- Lower shelf below baby tray to facilitate under surface phototherapy, Facility of 3 drawers for storage
- Height : 74.5″ (1890 mm), Width : 28.0″ (710 mm), Length : 39.0″ (990 mm)
- Bed to Floor Height : 37.5″ (950 mm)
- Distance between baby bed and heater: 33″ (840 mm)
- Mattress size: 30″ (762 mm) x 20″ (508 mm)
- Height of side panel above baby bed: 5.75″ (145 mm)
- Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
- LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
- LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
- Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
- Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
- Keypad lock facility
- Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
- Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
- Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
- Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
- Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
- Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)
- Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows
Performance/Electrical Specifications
Alarm Condition Alarm Messages on LCD Skin Sensor is unplugged /Faulty Skin Sensor Fail Air Sensor is unplugged /Faulty Air Sensor Fail Measured skin temperature higher than set temperature by 1.0°C Skin Temp. High Measured skin temperature lower than set temperature by 1.0°C Skin Temp. Low Measured skin temperature higher than 38.0°C (With cut-off) Skin Over Range Measured skin temperature lower than 34.0°C Skin Under Range Measured air temperature higher than set temperature by 1.5°C Air Temp. High Measured air temperature lower than set temperature by 3.0°C Air Temp. Low Measured air temperature higher than 39.0°C (With cut-off Air Over Range Heater power is 100% for more than 15mins Chk Sens Position Heater is unplugged or faulty Heater Open Heater Power drive fail/uncontrollable Chk. Pwr. Drive Power Fail Alarm Audio with LED indicator -
Infant Resuscitation Kit (Infant)
An Essential Carrying Kit for providing Effective Resuscitation to an Infant.
(Available in a Carry Bag).Contents of the Kit Infant Resuscitator, Foot Suction, Laryngoscope, Airways.
Infant Resuscitator:
- Rugged; 100% Autoclavable; Reusable.
- 250 ml silicone bellow.
- Non re breathing valve with 40 cm of H2O pressure release.
- Mask sizes : No. 00 & 01.
- 360° swiveling patient connector with standard 15 mm / 22 mm diameter.
- Corrugated PVC oxygen reservoir.
- 1.5 mtr. PVC oxygen tubing.
- Compact, light weight, easy to handle and operate.
- Durable rubber bellow.
- Long lasting stainless spring to provide friction free pumping.
- Completely autoclavable polycarbonate vacuum jar with lid (500 ml capacity).
- Scratch proof powder coated frame.
Foot Suction:
Laryngoscope : Stainless steel straight blades of size 0 & 1 with penlight handle.
Airways : Silicone, autoclavable & reusable in sizes 000, 00 & 0. -
Mouth to Mask Resuscitation
Technical Specification
- An ideal solution is to manage PPV in a simplest and safest way. Blow Safe™ is a scientific device designed to deliver PPV with pressure release valve and can be easily used by any Health Care personal. Autoclavable silicone corrugated extension tubing, polycarbonate one-way non-breathing valve, pressure release valve and silicone face mask makes the devices to be used in any ruff-n-tuff condition.
- Mouth Piece Silicone Corrugated Autoclavable Extension Tubing. The corrugate section prevents blockage of air inlet even when the tubing is in bending position. Due to high volume it creates sufficient pressure than ordinary tubing.
- Safety Pressure Release Valve One-Way Non-Rebreathing Valve This prevents mixing of inhaled and exhaled air.
- Silicone Face Mask This provides air tight sealing above nose and mouth. Size: 01
-
Oxygen Hoods (Medium)
Technical Specification:
- Single piece, Round Shape, made of autoclavable Polycarbonate material.
- Trauma free Silicone neck adjustment flap.
- Bilateral oxygen nozzle ( prevents direct flow of cold oxygen on patient’s head.
- Height : 7.5”.
- Width : 8.5”.
-
Phototherapy Stand
Mobile Stand with height adjustment facility along with easy swiveling of source box.
Unit can be used along with Infant Care Trolley, Radiant Warmer and Incubator.Technical Specification:
- 4 Special Blue CFL Tubes (20W each)
- 2 Daylight CFL Tubes (20W each)
- Single Head, surface Size, approx. 0.5m x 0.33m
- Head Height Adjustment, approx. 0.95 to 1.5m
- High irradiance at Skin level up to 40uw/cm²/nm (variable with distance)
- Wavelength – 420 to 500nm, with highest intensity at 470 nm
- Dual digital cumulative hour timer for tubes usage and patient exposure
- Antistatic Castors, 2 with brakes
- Power requirement – 230V/50Hz
- Power consumption – 100W
-
Phototherapy Stand with Trolley (Double Surface)
This is mobile Warmer Stand mounted on wheels.
Technical Specification
CFL Phototherapy Stand- 4 Special Blue CFL Tubes (20W each)
- 2 Daylight CFL Tubes (20W each)
- Single Head, surface Size, approx. 0.5m x 0.33m
- Head Height Adjustment, approx. 0.95 to 1.5m
- High irradiance at Skin level up to 40uw/cm²/nm (variable with distance)
- Wavelength – 420 to 500nm, with highest intensity at 470 nm
- Dual digital cumulative hour timer for tubes usage and patient exposure
- Antistatic Castors, 2 with brakes
- Power requirement – 230V/50Hz
- Power consumption – 100W
Infant Care Trolley
- Mobile Bassinet Cot for neonates
- Cart on 4 swivel castors (100mm Dia), 2 castors with brake
- Baby Tray with mattress alongwith head up/down facility and X-Ray cassette holder.
- Mattress density approx. 21-25 Kg/m³ and with removable, washable, waterproof cover
- Transparent acrylic, drop down and lockable side panels
- Two shelves below baby bed for under surface phototherapy and storage
CFL Under Surface Phototherapy
- Light weight detachable unit can be incorporated along with infant care trolley, radiant warmer, etc. (provided baby bed should have cut-out with transparent sheet to allow light) Fire retardant enclosure for light source
- Source cooling fan
- Mirror coated reflector
- 4 Special Blue CFL Tubes (20W each)
- 2 Daylight CFL Tubes (20W each)
- High irradiance at Skin level up to 40uw/cm /nm (variable with distance)
- Wavelength – 420 to 500nm, with highest intensity at 470 nm
- Dual digital cumulative hour timer for tubes usage and patient exposure
- Power requirement – 230V/50Hz
- Power consumption – 100W
- 2 Daylight CFL Tubes
- Digital Timer for Lamp Usage Hour and Patient Exposure
- Source Cooling Fan
- Mirror Coated Reflector