Demountable Transformer
Details for Demountable Transformer for Physics Lab
Demountable Transformer for Physics Lab Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I – core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I – core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories..
We are leading manufacturers, suppliers & exporters of Demountable Transformer for Physics Lab. Contact us to get high quality designed Demountable Transformer for Physics Lab for schools, colleges, universities, research labs, laboratories and various industries. We accept bulk orders for government tenders in all countries around the globe.
For similar products visit at main page of Magnetism Physics Labware.
Related products
-
Vernier Caliper Demonstration Wooden
Vernier Caliper Demonstration Wooden
A very useful class demonstration wooden model used for teaching vernier reading.
Wooden Model,
Length 600 mm
Vernier length 260 mm
Height 190 mmFor similar products visit at main page of Mechanics Physics Labware.
-
Hooked Weights wooden Block in steel
Hooked Weights wooden Block in Steel
• Set of 9 Brass weights except 1 kg and 500g with hooks at both ends.
• Set of 9 weights, 10-1000g in wooden block with weights of 1 kg & 500gm in steelFor similar products visit at main page of Mechanics Physics Labware.
-
Plastic Pulley Low Friction
Plastic Pulley Low Friction
Specifications :
One (1) high quality, single wheeled plastic pulley, on an open sided steel frame, with hooks at each end and one low friction, ball bearing plastic pulley with a diameter of 50 mm. The open sided frame greatly facilitates stringing up as no ‘threading’ is involved.
Inner gap of pulley measures 3 mm, overall length is 9.8 cm. Capable of holding over 30 lbs of weight.For similar products visit at main page of Mechanics Physics Labware.
-
Force Table-Pulley
Force Table-Pulley
Specifications :
Low friction, heavy duty metal clamp attaches securely to table tops from 10 to 24 mm thick and pulley runs smoothly on ball bearing.For similar products visit at main page of Mechanics Physics Labware.
Request Call Back
Reviews
There are no reviews yet.